Hayden VanderWeele
← All work

1 GHz Arithmetic Logic Unit (ALU)

Role —
Hardware Designer
Date —
November 1, 2026
Stack —
Verilog, Cadence EDA, Digital Logic

Objective

The goal of this CE 303 course project was to design, verify, and synthesize a digital Arithmetic Logic Unit (ALU) capable of performing standard arithmetic and bitwise operations under a strict 1ns timing constraint, targeting 1 GHz clock performance.

My Role & Contribution

As the sole hardware designer for this project, I was responsible for the entire digital logic lifecycle:

  • Authoring the RTL design (simple_alu.v) and comprehensive testbenches (simple_alu_tb.v).
  • Writing SDC constraint files to enforce the 1ns clock cycle.
  • Running logic synthesis via Cadence Genus and verifying timing paths.
  • Performing gate-level simulation using Cadence Xcellium and SimVision.

Engineering Process

1. RTL Design & Verification

I developed the ALU module in Verilog, ensuring accurate execution of addition, bitwise logic, and precise handling of edge cases like subtraction carry-out behavior. I built a robust testbench to validate the logic against expected truth tables before moving to synthesis.

2. Synthesis & Timing Constraints

To hit the 1 GHz performance target, I authored specific SDC constraint files. During the Cadence Genus synthesis phase, I systematically addressed I/O timing issues, specifically analyzing and resolving constraint warnings for 19 unclocked inputs and 9 unclocked outputs to ensure absolute timing closure across the entire module.

3. Gate-Level Simulation & Debugging

Transitioning from behavioral to gate-level simulation presented unexpected library mapping challenges. I encountered CUVMUR errors in Cadence Xcellium during the initial gate-level runs. I troubleshot this by diagnosing the library discrepancy and replacing the .lib files with the correct Verilog library models, resulting in a clean, error-free simulation in SimVision.

Results & Impact

  • Timing Closure Achieved: The final Genus synthesis timing report confirmed Path 1 MET with 578 ps of slack, comfortably beating the 1ns (1000 ps) constraint.
  • Design Verification: The ALU successfully passed all testbench assertions at the gate level, proving that the digital logic was both functionally correct and physically viable for 1 GHz clock speeds.